Wood filler, the type of putty used for filling big defects in wood, when dry is usually harder and more than dense than the wood that surrounds information technology. Although wood filler can be sanded, the softer surrounding wood is more easily removed, resulting in the filled surface remaining raised college than the forest. This can be a problem in pocket-size areas with high visibility, like filled gaps at the edges of inlays or repaired joints. The following techniques can be used to remove wood filler to match the surface airplane of the forest.

  • Wood filler, the type of putty used for filling large defects in wood, when dry is unremarkably harder and more dense than the woods that surrounds information technology.

Bank check the characterization on the packaging of the wood filler or putty. In that location are ii bones types of forest filler--h2o-based and chemical solvent-based. Water-based fillers volition often have the notation "Cleans up with water" and /or the statement "water based." Chemic solvent-based fillers volition accept listings of chemical components and a warning to avoid animate the fumes, and to use simply in well-ventilated areas.

For water-based filler use denatured alcohol or rubbing alcohol. For chemical solvent-based fillers use acetone, white spirit,or lacquer thinner. Test the technique with the called solvent on some other slice of filled scrap woods before applying information technology on your main project.

Dip and rub solvent

Put on a pair of thick rubber or plastic gloves and utilize the solvent directly to the surface of the wood filler, by first dipping the end of a clean shop towel or rag into the solvent, and then rubbing information technology lightly over the surface of the filler.

Using steel wool

Utilise a piece of steel wool to lightly abrade or buff the surface of the wood filler. Modify the direction of your strokes oft to more than evenly reduce the surface.

  • For h2o-based filler utilise denatured alcohol or rubbing alcohol.
  • Utilise a piece of steel wool to lightly abrade or buff the surface of the wood filler.

Keep the process in Steps 3 and 4, applying minor amounts of solvent when the previously practical solvent has evaporated or stale. Proceed abrading the surface of the wood filler until it is at the aforementioned surface plane equally the forest.

Filler level with wood surface

Remove whatsoever rest of the filler from the surface of the forest by using the cloth dipped in the solvent to wipe information technology away.

Many manufacturers of wood filler too separately sell solvent for their specific wood filler products, which volition accept superior results when used with this technique. Some other blazon of liquid wood filler, used for filling in pores of the wood'southward surface prior to stain and finish, tin exist removed using the same technique on a larger scale, followed by sanding with a fine-grain sandpaper.

Wear thick, protective rubber or plastic gloves whenever using any chemicals or solvents. E'er vesture safety glasses or goggles. Work but in well-ventilated areas and avoid breathing any fumes or vapours. Employ caution when working with any solvents. Read the safety warnings for the solvents and keep them out of the reach of children.